This article is divided into several parts that deal with different issues. How to set the laptop microphone, Please test your device before performing the solutions described in this article. After completing the device test, select the appropriate documentation section based on your question and follow the instructions. Changes in software, settings, or drivers may cause the microphone to stop working. If your microphone has only recently stopped working, you may need to use Microsoft’s System Restore feature to fix the problem.
I don’t know what brand of computer you are using, but it should be set up the same way. I’ll take my HP notebook to illustrate! Below I will introduce solutions to various microphone/recording problems. This article is divided into several parts that deal with different issues. Please test your device before performing the solutions described in this article. After completing the device test, select the appropriate documentation section based on your question and follow the instructions.
How to set the laptop microphone
Changes in software, settings, or drivers may cause the microphone to stop working. If your microphone has only recently stopped working, you may need to use Microsoft’s System Restore feature to fix the problem. Test Equipment To troubleshoot microphone recording problems, follow the steps below (the steps you use depend on whether you are using an external or built-in microphone). Testing the built-in microphone is located at the top of the laptop LCD display, or near the hinge at the bottom of the LCD. The best way to capture sound is to adjust your laptop’s display to place the microphone in the best direction for sound reception.
Speak directly into the microphone. Do not speak away from the microphone. When using the built-in microphone, choose an environment free of background noise. Test the external microphone to make sure the microphone port and microphone are functioning properly. Test the microphone on a known working small tape recorder, other computer or device with a working microphone interface. If the microphone can record sound smoothly, please test the recording function of the computer. If the microphone doesn’t work properly on another computer or tape recorder, try another microphone. To test the recording function of the computer, perform the following steps
Test Equipment
To troubleshoot microphone recording problems, follow the steps below (the steps you use depend on whether you are using an external or built-in microphone).
Test the built-in microphone
The built-in microphone is located at the top of the laptop’s LCD display, or near the hinge at the bottom of the LCD. Sound can be captured more easily using the following best methods:
Adjust the laptop’s display to place the microphone in the best orientation.
Speak directly into the microphone. Do not speak away from the microphone.
When using the built-in microphone, choose an environment free of background noise.
Test the external microphone
Make sure the microphone port and microphone are functioning properly.
Test the microphone on a known working small tape recorder, other computer or device with a working microphone interface.
If the microphone can record sound smoothly, please test the recording function of the computer. If the microphone doesn’t work properly on another computer or tape recorder, try another microphone.
Test the recording function of the computer
Follow the steps below to make sure your computer’s recording program is working properly.
1. Click “Start” > “All Programs” > “Accessories” > “Sound Recorder”.
2. Click “Record” and speak into the microphone. Save the file to an easily accessible location, such as your desktop.
3. To play the recorded sound, open the file with Windows Media Player.
4. If the recorded sound cannot be played, go to the next section of this article.
No sound or signal during the recording
After recording with the microphone, if no sound or signal is recorded, follow the steps below to resolve the issue.
Check connection
Make sure the microphone (if external) is plugged into the correct connector on the front or side of the computer.
If the microphone is connected to the correct connector and there is still no sound, try pulling the connector out about 1mm so that the connector is not seated very tightly into the connector. The possible reason is that the microphone connector does not exactly match the sound card interface. If that doesn’t solve the problem, firmly insert the connector into the connector and continue with the steps below.
see all information at https://support.microsoft.com
Check microphone settings
Follow these steps to make sure the microphone settings are correct:
1. Right-click the “Sound” icon next to the clock in the system tray. Select “Recording Device” from the drop-down menu.
2. Once the Sound window opens, go to the Recording tab and select Microphone. The “Microphone” item should show that the device is working properly, and there should be an indicator next to the item.
3. Tap the plastic part of the display. The indicator should bounce up and down in response to the sound.
4. If the microphone does not work, the indicator does not appear or does not respond to sound input, the following steps should be performed:
Click Properties. The Microphone Properties window appears.
Make sure the device is enabled in the Device Usage drop-down menu on the General tab.
Click the Levels tab. Set the microphone volume to 100.
Click the Advanced tab. Make sure all checkboxes in this window are checked.
Click Apply, and then click OK. Close this window.
Try recording again to see if the problem resolve. If there is still no sound, continue with the steps below.
Make sure the correct recording device select
Access sound properties:
1. Click Start > Control Panel > Hardware and Sound > Sound. The Sounds window appears.
2. On the “Sound Playback” tab, select “SPDIF Interface” or Audio Device.
3. On the Recording tab, select an audio device that installs on your computer. This device should be the same as the one listed in “Sound Playback”.
4. Click “OK” to close the “Sound” window.
Try recording again to see if the problem is resolved. If there is still no sound, continue with the steps below.
Remove duplicate sound card entries in Device Manager
If there are multiple sound card items in Device Manager, there may be a conflict between them. Perform the following steps to determine if there are conflicts and to remove duplicates.
1. Click Start > Control Panel > Hardware and Sound > Device Manager. If prompted, allow continuing.
2. Click the plus sign (+) next to “Sound, video, and game controllers” in the list and check for a sound card item with the same name.
3. If there are duplicates, select them one by one. Right-click the duplicates and select Delete until all duplicates remove.
4. Click the Scan for Hardware Changes button on the Device Manager taskbar. The system scans the system hardware and provides default drivers as needed.
Try recording again to see if the problem resolve. If there is still no sound, continue with the steps below.
Use Internet Software (Chat Room) to Solve Microphone Problems
There are many reasons for the inability to transmit voice over the Internet. The cause of the problem is different for different voice delivery software. Often, an internet connection using a proxy server or firewall does not work properly.
If the microphone can record sound into the computer, the microphone is compatible with software that transmits speech over the Internet. Test if the microphone is working properly. If the microphone is working properly, there may be a problem with the settings or functionality of the chat software. If the microphone isn’t working properly, see other sections in this article to troubleshoot the problem.
Fix playback, noise, and random noise issues
If Microphone Boost select, the noise will affect the recording. Follow these steps to check and disable the Microphone Boot settings :
1. Right-click the “Sound” icon next to the clock in the system tray. Select “Recording Device” from the drop-down menu.
2. Once the Sound window opens, go to the Recording tab and select Microphone. Then click the “Properties” button. The Microphone Properties window appears.
3. Select the Advanced tab.
4. Under Default Format, select the lowest sample rate and bit depth, such as 2 channels, 16 bits, and 48000 Hz (DVD quality).
5. Click the “Close” button and close all windows.
Try using the microphone again to see if the problem is resolved. i hope this post is more information keep stay with us ejobsresults.com