Dead Rising 2 – Steam configuration and Dualshock 4 Fix

Welcome to this post! Today, we’re excited to share some useful information regarding Dead Rising 2 – Steam configuration and Dualshock 4 Fix. Our hope is that this page will prove to be incredibly helpful for you.

Now, when it comes to Dualshock controllers, you may have been searching for a solution online without success. But fear not, because we have a fix that we sincerely believe will help you with this problem!

We’re going to be using X360CE to disable steam’s controller overflow, which will prevent steam from bursting our mask. Contrary to some inaccurate claims, the big picture update does not make this fix impossible.

Steam configuration

First, log into Big Picture mode and follow these steps:

  1. Right-click on Dead Rising 2 from your library and select properties.
  2. Go to the Controller tab and disable steam input.
  3. Exit Big Picture mode (you can find the settings in the top left corner of your screen).
  4. Click on the Controller tab again and go into the general settings for the controller.
  5. Check Xbox configuration support and remove the PlayStation configuration support. We’re not sure if other settings would cause issues, but we checked all of them just to be sure.

And that’s it for Steam! Now, let’s move on to our emulator. We hope that this fix will prove to be incredibly helpful for you, and we wish you the best of luck with your gaming endeavors.

X360CE

To start, we will be using X360CE  Download to disable steam’s controller overflow, which will prevent steam from bursting our mask. Contrary to what some people believe, the big picture update does not make it impossible.

First, log into Big Picture Mode and right-click on Dead Rising 2 from your library. Go to properties and navigate to the Controller tab. Disable steam input and exit Big Picture Mode.

Next, click on the Controller tab once again and go to the general settings for the controller. Check Xbox configuration support and remove the PlayStation configuration support. Make sure to avoid messing with other settings.

Now, let’s move on to using X360CE. Before starting, make sure to turn off Steam completely and disconnect your controller from your PC. Then, download X360CE from [x360ce.com] and click on “download all games” to save the file to your Dead Rising 2 folder.

Connect your controller to the emulator and click Add, then select your controller. Click on “Remap All” to map the controller as desired. If your inputs aren’t being recognized, make sure Steam is off and reconnect your controller.

After mapping, check the “Issues” tab and install anything you see there. If there are no issues, launch Dead Rising 2.

If your controller still isn’t working, go to PC settings in the main menu and activate the grayed-out gamepad.

Remember, if you encounter any issues, make sure your Steam configuration is correct and restart everything. Disconnect your controller, switch off Steam, shut off the emulator, turn the emulator back on, reconnect your controller, configure it, and launch Steam.

Congratulations! You have completed the Dead Rising 2 – Steam configuration and Dualshock 4 fix. If you have any inquiries or suggestions on how to improve this guide, please let us know.

Leave a Comment

Your email address will not be published. Required fields are marked *